Automatic Meter Reading Equipment

Our department is using the Invensys Radio Reading System for all of our metering needs. Each meter has a radio transmitter box located close to the meter on the inside of the building. A battery located inside the transmitter sends the reading to a laptop PC. This PC allows the Water Department to read all 10,500 water meters in no more than three (3) days, as opposed to the old meter reading schedule of 22 days.

About The Meters

The water meters and RadioRead System are made by Sensus Technologies, a leading manufacturer of water flow measurement equipment and systems. The meters have a low flow leak detector - the black triangle visible under the meter's lens cover. The triangle rotates whenever water is passing through the meter, even at extremely low flows, such as when small leaks occur in the piping system.

To use this leak detector, turn off all your water outlets including such automatic devices as the ice maker in the refrigerator, then watch the triangle for about one minute. If it does not move, it means your plumbing system is not leaking.

If you wish to check your water usage, the new meters can be visually read by the odometer wheels under the clear lens housing.

 

Do you have any questions about our Automatic Meter Reading system? Then click here and we will try to answer your questions....

Click for Valparaiso, Indiana Forecast

This website was created and is maintained by Valparaiso City Utility Employees. Please read our Disclaimer Notice.

Copyright © 2007-2008, City of Valparaiso, Indiana. All rights reserved.